• Home
  • Install ink cartridges

Epson 440 Xp Install

Step 1: Unpacking the Install printer package

  • Take out the printer from the packing box and start removing all the tapes around it.
  • Make sure to remove all the protective materials, covers, and plastic films from the printer.
  • Raise the ink cartridge access door on top and remove all the packing tapes. Then, lower the door.

    Check for the following components that came with the printer:

    • Power cord
    • Manuals
    • Installation CD
    • Four-color ink cartridges
    • Using these steps we can execute that epson XP 440 install the printer.
epson xp 440 install software

Step 2: Configure Install the printer

  • Remove the twist tie from the power cord.
  • RLocate the power outlet behind the printer.
  • RInsert the power cord’s one end to the printer and connect the other end to an AC outlet.
  • RLift the control panel’s angle to your convenient position by pressing the release bar under the control panel
  • RTurn on the printer by touching the Power button.
  • RUse the navigation arrow buttons to select your language. Then, press the OK button.
  • Using these steps we can execute that epson XP 440 install the printer.

Step 3: Install ink cartridges

  • Raise the scanner unit to fix all the ink cartridges.
  • Unpack all the covers from the ink cartridges.
  • Shake the ink cartridges one by one gently before installing them.
  • Make sure to remove only the yellow tapes from the cartridges.
  • Insert each cartridge into the correct slots and press them down.
  • You will hear a clicking sound when the cartridge is perfectly fixed.
  • Check whether the installed cartridges match the color on the slots.
  • Now, close the scanner unit and press the Start button on the printer.
  • Once the cartridges are fixed, the printer begins to charge the ink.
  • The priming process takes about 4 minutes to complete.
  • You will get a confirmation message on the printer’s screen after the charging is finished.
  • It is recommended to use only Epson genuine ink cartridges for a better performance.
  • Using these steps we can execute that epson XP 440 install the printer.

Step 4: Loading Paper

  • Lift the paper input tray to load the paper stack for printing.
  • Gently tilt the input tray and its extender backward.
  • Adjust the paper guides by sliding the tab.
  • Pull the paper tray and raise its support to prevent falling of paper.
  • Align the stack of paper on a flat surface and fan it before loading the paper stack.
  • Now, load paper into the input paper tray by facing the print side up.
  • Slide the guides to the end of the paper loaded such that they do not fold the paper edges.
  • Now, set the paper settings and preferences on the control panel display of the printer.
  • Choose the paper size, type, and preferences. Then, press the OK button.

Step 5: Installing Software

  • Install the software to connect your device and the printer.
  • Choose the connection method as Wireless or Direct USB connection to activate the driver for the printer.
  • Using these steps we can execute that epson XP 440 install the printer.

Epson XP 440 Installation Software

After you have done the hardware connection and initial setup on the printer, get back to your device to start the driver installation process. Carry out the procedure given below to install the software on your device.

  • Insert the driver CD into the CD/DVD drive of your device to begin the installation.
  • You can also download the driver for Epson XP 440 from the official support site of the printer. Choose your printer name and download the required driver on your device.
  • Locate the installer file and double-click on it to run the installation.
  • Follow the prompted instructions in the wizard to install the software on your device.
  • Select your language and accept the license agreement after reading it carefully. Click Next. 
  • Choose the required software you want to install and click the Install tab.
  • Choose your connection type as per your preferred choice.
  • Using these steps we can execute that epson XP 440 install the printer.

Wireless connection:

  • For Wireless connection, configure your wireless network before starting the setup.
  • If not automatically connected, use the printer’s control panel to connect to your wireless network. @Choose your network name and enter the password of it. 

Wired connection:

  • For Direct USB connection, connect the printer and your device using a USB cable.
  • Print the check report to view the settings.
  • You can now print and scan from your connected device.
  • Using these steps we can execute that epson XP 440 install the printer.